Az-gti。 Sky

Sky

However, I preordered the equatorial wedge used by the Star Adventurer because I knew I would eventually need it. As a beginner astrophotographer and amateur astronomer, I would not have that budget to get large aperture telescope and to handle such bulky telescope again need costly telescope mount. Built-in WiFi• There are other subs and communities for this. Controlled with SynScan Pro app for iOS and Android• 32x• upload new firmware via Uploader into Az Gti telescope mount. Beyond that my only suggestion is contacting the vendor or manufacturer for support. Since I have a USB port on the mount, I understand it DOESNT NEED an eqmod cable. These directions make little sense to me. This causes some problems that I have been alleviating as I could during my astrophotography sessions. Although 60s was a real achievement for me by that time considering the "simpleness" of this method. One of the things people enjoy the most is the GOTO accuracy. The ASIAIR PRO supports RAW files. DC operation batteries not included The Sky-Watcher AZ-GTi is for anyone looking for a small, powerful mount. While JavaScript is disabled, you will not be able to add items to your cart or browse all product options. By default, skywatcher make this AZ Gti for AZ mode, by default firmware installed is for AZ mode, to get this working for EQ mode you would need to install new firmware from the sky-watcher website. Is the fact that both rs232 cables the mount one and the asiair one are male. It's still a mount that is not specifically designed for astrophotography, nor as an equatorial mount. Connect the RJ — RJ232 supplied with the mount to the hand controller and the RS232 — USB cable supplied with the ASIAIR. It is a very fast and very easy polar alignment system. Hey James Also have a new eq6-r Pro and ASIAIR Pro. Sky Watcher AZ-GTi Computerized Altitude-Azimuth Mount Great mount for a smaller telescope. And after getting the ASIAIR PRO i have experienced the connection problem. This approach was not very reliable since it depended on how well aligned the polar finder was and the declination axis to be perfectly parallel to AR axis. skywatcher Az Gti best telescope mount for beginners review My Conclusion Sky-watcher Az Gti telescope mount is best beginners mount for deep sky Astrophotography along with planetary imaging, and it fulfills all required ingredients needed for beginners, inexpensive, easy to handle and arrange, compact in size, portable. Any content which encourages, promotes, provides resources, etc. After aligning the telescope, I can then pick an object, Saturn for example, and then "Go To" but that only takes me to Saturn, doesn't follow it through the sky. With a 60-second preset exposure setting, the AZ-GTi can trigger a DSLR using the auxiliary shutter release cable. Mode — It has AZ mode basically, but by using new software you can make it as EQ mode, this mount works without any problem with EQ mode Only thing make in mind that you would arrange all gears on the right side. 11 pound payload capacity• Polar finder The next attempt was to use a polar finder. To avoid most problems, what I have done is to configure the AZ-GTi to connect to the laptop and not the other way around. Posts are helpful for people with similar questions. Everything is on and the rest of the functions within the app work. There are two ways to connect your SkyWatcher mount to the ASIAIR. I bet most of us stay in City area which has very bright and no space to arrange these heavy and expensive astrophotography gears in our small space balcony or near window. Unfortunately we are unable to offer our excellent shopping experience without JavaScript. Freedom Find dual encoder technology• D I need to buy a special cable or maybe change the settings? Is there a setting in ASIAIR pro to get photos in color and to accurately goto target each time? Built-in WiFi• So I would recommend this mount as best and must buy who are thinking to get their first mount for deep sky astrophotography. Meridian change The meridian change has almost the same problem as GOTO. Connection issues As it is a Wi-Fi mount, we depend on the wireless network of the mount and the laptop to not fail during sessions. So order a M8 to M12 adapter often labeled as an "insert" at the same time. Final results Every time I went out for stargazing I did some tests to move forward in this process of finding the best way to use the AZ-GTi, align it and fix problems, but it was worth it. Now you could use ASIAIR APP in your phone to contral the mount. I am also going to have full setup details of Az Gti with ASIAIR. Direct links should be accompanied by commentary as a top level comment, and should be a source of discussion. I am going to publish a post about EQ mode arrangement and how it will be set up along with ASIAIR to get advanced astrophotography. 11 pound payload capacity• I know we all will agree on this that astrophotography is fascinating and challenging because of earth rotation. NOTE: This article has been published in of A year and a few months has passed since I started on astrophotography and I had to learn a lot of things to get here. I have installed a counter weight to allow smoother operation of telescopes that are near the weight limit of the mount. Just need to point the north direction, and your telescope is ready for GoTo. And how to connect SkyWatcher AZ-GTi Mount with ASIAIR? So I used the hand controller to input this info and the asiair app is showing, in Telescope Settings, a value for RA of 20h 21m 20s, even though my mount is in its home position and the entire mount is pointed directly at Polaris. Then, I ran the mount firmware update utility and followed the instructions to update it to the version that allowed the equatorial mode. Once the camera is plugged into the mount and a shot is fired, it will continually shoot 60 second exposures until the cable is removed. Available in three configurations ' mount set only, with a 102mm Maksutov OTA, or with a 127mm OTA ' the AZ-GTi delivers the perfect grab-and-go system for the astronomer thats on the move. After discussing about the topic and having read dozens of posts in the forums, I identified four possible approaches for polar alignment:• However, the AZ-GTi does not have this finder, neither the hole to place it in the center of the axis, so i would neet to figure out to find a polar alignment method for this mount. Everything I am going to cover here. Easy Integration with any Tripod The AZ-GTi includes an adjustable aluminium tripod with built in pier extension. Comments I hope those who have in mind to start with this astrophotography will have more information with which to make decisions about AZ-GTi after reading this article. This enforces quality, encourages discussion, and benefits everyone. I currently have a very portable, versatile and affordable equipment. I thought to write about telescope mount for beginners along with Sky-watcher Az Gti review and details how to make it works equatorial mode. That I still need to use the hand controller initially? Slew Speeds - 800x• Why get complicated in these instructions? I know that you may have your list and I am happy to hear your points, kindly puts those in the comment area. 6 lbs, the AZ-GTi is the ideal travel mount, easily fitting in carry-on luggage and perfect for grab-and-go situations. Read : Details about Skywatcher Az-Gti telescope mount Here are the details about Az-Gti based on my analysis Goto mount — This telescope mount is computerized GoTo mount, Goto can be done via Sky-Watcher App. So finally, I decided to buy it, and in November 2018 I received the package with my brand new AZ-GTi, with its extension column and tripod. Images must be taken by you, with gear which you own - remote or professional services such as DSW or Hubble are not permitted. In the ASIAIR App select SynScan when choosing your mount. I connected my EQ6R-r Pro mount to the asiair via usv2 cable. There is no USB connection option only a serial connection option or Ethernet. Better if it has an in-build battery or operates on battery. And you say that there is not need to get any other cable for this connection. I will be happy to answer any questions. Can Handle up to 5-7 Kg weight. This would allow me to not have to carry with heavy batteries or have to deal with so many cables, and this allowed me to achieve one of the most compact and lightweight mount and telescope configurations on the market. After several tests I found that the alignment was very inaccurate and I would have to look for a better method. AZ-GTi Quirks Very happy with mount. There is no need for an intervelometer timer with the AZ-GTi. And, how do you connect RJ — RJ232 and the RS232 — USB since both are male? But how to connect these 2 devices? Here is your advice There are two ways to connect your SkyWatcher mount to the ASIAIR. the mount needs to be portable so that after the astrophotography session I can quickly pack it and put in the store area. 11 pound payload capacity• Non-civil behaviour such as insulting, flaming, etc, will not be tolerated. In the ASIAIR App, select EQMOD when choosing your mount. If you prefer, you can connect from the SkyWatcher mount, straight into the ASIAIR, bypassing the hand controller. Rule 1: Piracy• 11 pound payload capacity• You can post used item ads here, but do post them on other communities or websites such as Cloudynights, Astromart, etc. this last hurdle however is beginning to make me a bit disappointed. Sometimes weird unexplainable things happen that updating can resolve. Revolutionary WiFi Control The AZ-GTi is one of the first Sky-Watcher products featuring built in WiFi control. I am writing a post to go through EQ mode setup and arrangement of Az Gti telescope mount for beginners. Sky-Watcher Az-gti telescope mount for beginners Sky-Watcher Az-Gti telescope mount for beginners astrophotographer When I thought to buy the first telescope mount I had listed down below points before making any decision. I use the counter weight in Alt Az mode while most people only use one in EQ mode. As long as your equatorial mount is one of the many that is supported then you to will have simple and accurate GOTO. It appears that you recommend purchasing an EQMOD cable. Skywatcher Az gti review telescope mount for beginners After having deep sky astrophotography expertise, I can say that the telescope mount is essential and necessary astrophotography gears. I was able to do a polar alignment, but I could not get the connection to the mount via any of the skywatcher synscan options. Once all done press update button to upload your new EQ mode firmware into AZ-Gti mount. Another advantage to using EQMOD is you can skip the star alignment and go straight into plate solving. Also added a picattiny mounting ring in the middle to hook it to the rail. deep sky astrophotography is Expensive but beginners can start with simple and inexpensive gears. Infringing posts will be removed. Been able to drive a Celestron 6" SCT with no apparent strain. Self promotion is only permitted to active members of the community. Multi-purpose alt-azimuth mount• I'm having a hard time figuring out how to track objects with the SynScan App. com" url: text search for "text" in url selftext: text search for "text" in self post contents self:yes or self:no include or exclude self posts nsfw:yes or nsfw:no include or exclude results marked as NSFW e. The AZ-GTi includes an adjustable aluminum tripod with built in pier extension. These compact and powerful Maksutov-Cassegrain scopes are combined with a limited-diffraction optical system and fully multi-coated lens surfaces. Our site is powered by industry leading standards for your protection. I have a NEQ6 PRO and after getting the ASIAIR PRO i am experiencing connection problems. The first test I made was to put the finder on some rings and place it on the clamp of the declination axis like a telescope, pointing parallel to RA axis. The second option I tried, was to first align the wedge using the polar finder with an adapter so when the wedge is aligned, it would only be necessary to put the mount in the already aligned wedge. I just need my tripod, a briefcase which contains the AZ-GTi, my ED72, a 1. DC operation batteries not included• The 127mm OTA comes with a red dot finder, 1 inch diagonal and Super 10 and 25mm eyepieces. You could use RJ-RS232 to USB-RS232 to connect your mount with ASIAIR. If you're using your Android phone as the controller, don't forget to give the Synscan App permission in phone settings to use your location. Also I setup a fixed network configuration for the mount so I don't have to find out what configuration it gets every time you connect and I can diagnose any problem more easily. Mounting Saddle Type - V-Style• Charts, events, marathons, telescopes, eyepieces, reviews, articles, etc. The guide camera is already connected and able to loop photos. Controlled with SynScan Pro app for iOS and Android• This still makes no sense to me. If you do mount a Celestron, be prepared to load the alternate motor firmware which allows mounting your scope to the right of the mount or your scope will be upside down and focus knob in a weird place on the left. 6 pounds, complete with pier extension and tripod, this versatile mount supports a hefty 11 pound payload. Easy Setup — This Telescope mount can easy setup quickly. Problems I've found with the mount The AZ-GTi is a compact mount and very good given it's size, weight and cost, but let's not fool ourselves. The photos are in black and white not color. It needs to be quickly arrange-able, an area like me can have cloud at any time and can have clear sky at any time! September 27, 2019 , Since its release in 2018, the ASIAIR has been very well received. It can handle 5-6 Kg weight without counterweight. Kindly comments your questions or feedback, if you like it then kindly do sharing. Wifi connection simple and reliable. After doing two to three weeks of research on various sites day and night, finally one day I come on my conclusion that I am going with Sky-Watcher Az-Gti telescope mount. Rule 3: Be civil• No cables no hand control problem, in the era of portable devices you can control everything of this mount via your Handphone. Alignment with software• I thought the third time would be the charm, so I decided to attach the polar finder to the side of the mount. Also the photos are jpegs when transferred from thumb drive to the computer. Anything that relates to amateur astronomy and its practice. Although they tend to be much more accurate than other methods, they also require additional hardware or tedious iterative processes that can be cumbersome and slow, so I left them as a last resort option. However, the problems with this approach are that it is not very precise, and on the other hand, that to increase its accuracy, the laser must be collimated to the RA axis. The first problem I had to solve is that I needed to be able to place the mount in equatorial mode to do astrophotography, so I would need an equatorial wedge for it. The EQ8 and other newer mounts do not require an adapter but can instead be connect via the hand controller straight to the ASIAIR with the cable supplied with mount. Need to works with EQ mode• The Mak design corrects off-axis aberrations like comas and chromatic aberrations, while the limited-diffraction system prevents light from being scattered by defects in the mirrors and corrector plate. The physical design of the AZ-GTi is not intended to align it like a regular equatorial mount. Not providing commentary, or posting content from a single source will be assumed to be attempts of driving traffic, which is not allowed here. to get these deals which only will be available for a very limited time. If you cannot enable cookies in your browser, please — we are always here to help! How to Setup Az-Gti to EQ mode? This method does not require the purchase of any extra cables. Some by good means, and many by the bad ones. Links to petitions, surveys, crowdfunders, and other advertisements to sell your own products are prohibited here. It allowed a better alignment than the previous option, but it was still not as reliable as it could be because by placing the mount you could move the wedge by mistake, and even the weight of the mount itself slightly modified the altitude of the equatorial wedge when I placed it. To use EQMOD, you need to purchase a third party, EQMOD dedicated cable. Web browser based cookies allow us to customize our site for you, save items in your cart, and provide you with a great experience when shopping OpticsPlanet. 5kg counterweight and the polar finder and a backpack with the camera, the laptop and some accessories now I also carry the guiding camera and the small guiding telescope in addition to other cameras for timelapses. 200x• This sub is not a place for such illegal activity. How to setup Az Gti for Equatorial Mode Yes! The Sky-Watcher AZ-GTi is the perfect tracking platform if you are looking for a compact travel mount capable of both Alt-Az Go-To alignment and video timelapse. Please enable JavaScript in Your Browser JavaScript is not currently enabled in your browser and due to this our site will not work as it should. Second, why connect through the hand controller at all? What I did was to glue a picatinny rail usually used in airsoft guns for telescopic sights to the side of the AZ-GTi. The AZ-GTi is a great portable mount and works with the ASIAIR via not just EQMOD but also wireless EQMOD. By that time, when I considered getting a mount to track and increase the exposure time of my photos, I was studying. exe and run it skywatcher Az Gti Goto Wifi telescope mount Firmware loader screen Once the connection is made, you will see the above the window. A very compact and lightweight altazimuthal mount, with GOTO system, but, with a firmware upgrade, it could be used as an equatorial mount. In SynScan App I pressed the connect button, and I was ready to control the mount from the software. Do u have a complete tutorial on how to get started with ASIair? Built-in WiFi• Features of Sky Watcher AZ-GTi Multi-Purpose Alt-Azimuth Telescope Mount:• I found a PVC tube with an internal diameter slightly wider than the outer diameter of the polar finder and I added 3 collimation screws to each end of the tube. 11 pound payload capacity• Rule 4: Direct links• Yes, the ASIAIR is compatible with your mount. As earth rotates we would need EQ mode — equatorial telescope mount in order to rotate telescope in same direction of earth rotation. Bought my first telescope a couple of weeks back Sky-watcher Explorer 130ps with AZ GTi WiFi Mount so I'm quite new to it all. Subreddit Rules Before posting, make sure your post follows the subreddit rules otherwise they may be removed. Once the polar finder was inserted into the tube, I only needed to hook it to the rail. Additional Subreddits of Interest• Freedom Find dual encoder technology• Multi-purpose alt-azimuth mount• After a few minutes, I reconnected to the mount from the SynScan software and I noticed that this time the software shown a dialog asking the mode I wanted to operate the mount. 400x• To do this I went to the SkyWatcher website and downloaded their SynScan software and the utility to update the mount firmware as well as the firmware itself. This scope is worth in EQ mode and its working like a champ for me while doing deep sky astrophotography and. If possible then must be GoTo mount — for deep sky Astrophotography computerized Goto mount is helpful. There will be tracking options in the menu. JavaScript is blocked by AdBlocker or ScriptBlocker We're sorry - it looks like some elements of OpticsPlanet are being disabled by your AdBlocker. The AZ-GTi come with the mount head, pier extension and tripod. All amateur astronomers will be agreed on my statement that it is an expensive hobby, but we can start with simple setup and most advanced to keep our hobby alive. Do you know af any good tutorial online for aid? Lastly, if you choose to use the 2 pound Skywatcher counterweight with this mount necessary for Equatorial , realize the counterweight has a M8 thread and the AZ-GTi takes an M12 thread. Operate with also has external 12V DC power supply. Features of Sky Watcher Skymax 127 AZ-GTi Telescope:• The One That goes from the synscan To the mount. Built-in WiFi• This method was pretty good, but it was still not very accurate. Power Type - 8 AA batteries or external 12V power supply• One of the error messages I get is that I need to PA and 3 star align 1st? Alignment with polar finder Software and drift methods From the start I discarded the software and drift alignment methods. Once I had the DIY equipment ready, nothing assured me that the axis of the polar finder was completely parallel to the RA axis, so I needed to collimate it. This is not easy to do in this case since the laser is only visible at night. Your is important to us, and any personal information you supply to us is kept strictly confidential. Your AZ- Gti mount is ready for EQ mode. , for the act of piracy is prohibited. use the following search parameters to narrow your results: subreddit: subreddit find submissions in "subreddit" author: username find submissions by "username" site: example. Adjustable height aluminum tripod with 1. So the mount would be aligned just pointing the laser to Polaris. I've Googled and Googled but I can't find any information on how to actually use it and the manual is inadequate. Are raw files not available in ASIAIR pro? So I tried the fourth option, which is the one I am currently using and which gave me the best results. Given that the other option was to get the Star Adventurer, and given my little knowledge about astronomy and locating objects in the sky, I decided that AZ-GTi could be the best option in my case. After downloading all the software, I put the batteries into the mount and connected the computer to the Wi-Fi network that is activated when it is turned on. Drift alignment• GOTO alignment sometimes did not work well I have had situations in which when aligning the mount during the GOTO alignment process and after aiming at the first object and moving to the second one, the mount move to impossible positions that causes the telescope to collide with the tripod. I am able to connect my Canon Camera 5dsr and guidescope 120mm-s. The comes with the mount head, pier extension and tripod. Check the EQ6-pro has been balanced before polar aligning, and the mount is in zero position before connect the power. Does the SynScan still have to be connected to the mount for location and date adjustments? This includes your gear as well as any processing you did to the image. Adjustable height aluminum tripod with 1. Make sure sidereal tracking is turned on.。 。 。 。 。

>

Sky

。 。 。 。 。 。

>

Sky

。 。 。 。 。

>

Sky

。 。 。 。 。 。 。

>

Sky

。 。 。 。 。 。

>

Sky Watcher AZ

。 。 。 。 。 。 。

>

Sky

。 。 。 。 。

>

AZ

。 。 。 。 。 。

>